CarTFT.com
Product comments of Artificial
|
CTF840 - VGA 8.4" TFT - Touchscreen USB - Video - Autodimmer - USB-HUB - Audio *new* |
| 14.08.2009
A very good display, excellent build quality. I used it for two years, and i am still impressed. The only problem i had was that i had to calibrate touchscreen from time to time. |
|
|
|
|
|
M350 Mini-ITX enclosure |
|
| 14.08.2009
Very good build quality, best design. It has no fans included, but you can install one in the front, and two on each bracket., but i don't think you will need them, because the case itself is very open. |
|
|
|
|
|
HDD/Fan bracket f. M350 enclosure |
|
| 14.08.2009
Nice addition to the original case. It fits perfectly, but there are no screws added, so you have to buy them separately. I recommend to but it even if you are not yet planning on having two HDDs. |
|
|
|
|
|
PDA/PC GPS Receiver (Sirf 3 chipset) |
|
| 14.08.2009
Very good receiver, fast start, fixes to many satellites (more than my garmin, or cell phone). It also works under tinted windows. No problems whatsoever. |
|
|
|
|
|
All-In-One Connector cable for CTF-, MM-, MH- TFT Displays - 5m - |
|
| 14.08.2009
A normal cable for display, nothing special about it. Same as the one included with display, but longer. No problems with USB (USB normally has maximum of 5m range). |
|
|
|
|
|
PDA/PC GPS Connecter-cable |
|
| 14.08.2009
Good quality cable, driver CD is included, but i recommend downloading drivers from cartft.com, especially if using it on Vista/Seven. It does what it says it does, and it does it well. |
|
|
|
|
|
Ext. Case 5,25 USB SLIM (Velocity, for SATA CD/DVD/Blu-Ray) |
|
| 14.08.2009
Nice case for a slim-line slot-in CD or DVD. It requires both USB connectors to be connected, or an external power source (5V), or CD/DVD inside will not get enough power to run. |
|
|
|
|
|
AC Power adapter (12V, 10A, 120W) |
|
| 14.08.2009
Nice power adapter. It has a low-voltage 5mm connector with 2.5mm inner radius. Power cable is not included. When i tested it, it was 15V, but i was testing if the Voltmeter was working, so voltmeter could be wrong (it was some old analog one, i haven't used for years). |
|
|
|
|
|
Cold devices power cord (Cloverleaf) EU |
|
| 14.08.2009
normal cable, nothing special about it. I bought two of them. I use it for my 12V power adapter, and another one for my laptop power supply. OK so far. |
|
|
|
|
|
P4-Slim Cooler |
|
| 14.08.2009
Good low-profile cooler, easy installation, but it is not enough for a powerful CPU in a hot summer environment. Would recommend for lower powered CPUs. |
|
|
|
|
|
ATX Adapter cable (24pol male - 20pol female) |
|
| 14.08.2009
a very good cable, it is perfect for using old ATX power supplies with newer computers. |
|
|
|
|
|
Mounting unit for MM400 V2 / CTF700 / CTF840 displays (to be mounted on car-specific body) |
|
| 14.08.2009
nice holder. I use it for my CTF840. Firm grip, no vibrations at all, easy installation. One problem is that if you use this, you can not easyly remove the display from the car. It is a bit hard to insert it in display. |
|
|
|
|
|
TFT Display Suction holder (Heavy-Duty / Holds up to 27 kg) *new* |
|
| 14.08.2009
Nice and steady holder. When you put it on a window it stays there, and does not fall off, but it takes a lot of your view space. Also a bit hard to insert it into display. |
|
|
|
|
![Car-PC M3-ATX 6-24V DC/DC (125 Watt) [picoPSU-format !]](http://www.cartft.info/image_db/CAT_M3-ATX.jpg)
|
M3-ATX 6-24V DC/DC (125 Watt) [picoPSU-format !] |
|
| 14.08.2009
What can i say... one of the best power supplies ever. Very powerful, survives engine cranks, etc. It is also very easy to connect it to a PC with serial cable for adjusting timings - very useful. |
|
|
|
|