CarTFT.com
MHero-L-B Mini-ITX enclosure (1x PCI, Slimline ODD, 84W PSU)
This beautiful enclosure for Mini-ITX and Micro-ATX can be equipped with every mainboard where CPU heatsink height does not exceed 5,5cm. Behind his slideable front bezel there are 2x USB ports, 1xMic, 1xLine-Out and the slimline drive bay for CD/DVD drives.
Because of the integrated ATX 120W power supply and the external 84W AC/DC adapter you fanless can power also systems with higher performance. For using the system as a car-pc you can exchange the internal PSU against a M2-ATX(-HV) Automotive power supply.
The PCI-riser card, which is in scope of supply, enables you to install a PCI card. On enclosure rear side you also can install 2x RS232 ports, 1x SATA an
[more]
This beautiful enclosure for Mini-ITX and Micro-ATX can be equipped with every mainboard where CPU heatsink height does not exceed 5,5cm. Behind his slideable front bezel there are 2x USB ports, 1xMic, 1xLine-Out and the slimline drive bay for CD/DVD drives.
Because of the integrated ATX 120W power supply and the external 84W AC/DC adapter you fanless can power also systems with higher performance. For using the system as a car-pc you can exchange the internal PSU against a M2-ATX(-HV) Automotive power supply.
The PCI-riser card, which is in scope of supply, enables you to install a PCI card. On enclosure rear side you also can install 2x RS232 ports, 1x SATA and 1x 4pol power.
Please login for creating product ratings.
from jonizodi am 05.08.2017
from tohempel am 11.03.2015
| 
| See all my comments
from css31 am 29.06.2013
|
| See all my comments
1
2
3
Forward
Your rating: 
Please tell us your opinion. Rate the product on a scale from 1 to 5. A value of 5 means the best possible rating.
If you want you also can leave a comment.
Your ratings are honored on many ways. Your report will help other customers to better judge about the products. And
you can benefit from reports other customers are giving.
In addition we credit 0.50 EUR for each given rating with comment and 1.00 EUR for each given rating with comment (more than 150 characters)
on your account. The credit will be substracted automatically on your next order !
We reserve us the right to delete given comments (for example on attempts to give comments with senseless content, copying of other comments, inserting of foreign content, abusing the system for financing orders).
"Fair-use-policy" does apply (as of rule of thumb you should give comments for products which you have purchased already. And your credit account only in rare cases will have 2 or even 3 digits). The credit can only be withdrawn by placing an order. It is not possible to get the credit cash or transferred in an other way.
|
Customer ratings:
Average rating, based on 12 ratings |
from jonizodi am 05.08.2017
It's a great case, although the indicated maximum cpu-cooler-height is wrong: It's under 50mm, not 55mm. An original Intel-Heatsink does fit, but an Arctic Freezer 11 LP with 53mm does NOT fit. I had to send that one back unfortunately... Don't get the description wrong, it really is an PCI-Riser, NOT PCI(express). If you want it to stand upright: The stand you see on the image is different that the actual one(s): You get two smaller stands which don't really hold a tight grip, i had to use double-sided tape to fix them.
Still then, the case is pretty cool, a micro-atx-board does fit if it doesn't exceed the indicated width, build-quality is oukay. I like that the power supply is powerful enough to power a nice system. It's my HTPC-DVD-Media-player-with-a-little-gaming-capability :)
from tohempel am 11.03.2015
|
| See all my comments
ist ein echt stylisches Gehäuse mit extrem viel Platz für ein mini-ITX Board. Leider konnte ich den integrierten Spannungswandler nicht testen weil er entweder einen Full-ATX oder einen 4-poligen Stecker bot, mein PD10BI aber nur einen 2-poligen Steckpfosten hat.
Erwartungsgemäss brauchte man beim Einbau des Boards etwas Fingerspitzengefühl und Gedult weil alles etwas auf Spannung eingebaut werden muss.
from css31 am 29.06.2013
|
| See all my comments
Very good case usable with a PCI card. Bought it for a firewall (IPfire). With a Intel D2500CC that has 2 Gigabits LAN it's perfect. I put a Network PCI card in order to have 3 NICs.
Documentation is missing but after a few test I finished to plug all the power wires.
I had also to cut some parts of the Motherboard's rear plate because some case's screws was touching it. I had to cut a part of the PCI card's support because it cannot fits with the rear plate.
wie immer alles gut